Speli, speed tester arcade game
Description
This Is Traditional Speed Test Arcade Game. Parts List: - Arduino Nano - 16 X 2 Lcd Display With I2C-Card - 4 Big Buttons With Leds (Outer Diameter 45 Mm, Colored Button 36 Mm) - Battery Box 6 X Aa Or 8 X Aa (Max Dimensions 120 X 59 X 16 Mm) - On - Off Switch - Wires (10 And 25 Cm Female To Female Jumper Wires) - M3 Screws And Nuts - 4 Anti-Slip Rubber Feet Pads Print Parts. You Need 2 Bottom Plates, Or Use Transparent Polycarbonate. Fix It With M3 Screws, Nuts Are Not Needed Here. In Buttons Do Not Use Lamps, Only Leds! If There Are No Leds, You Can Make Your Own: Https://Www.Thingiverse.Com/Thing:2674020 Use 6 Mm M3 Screw To Secure Nano To Its Place How To Reset The Record To Zero: Press Leftmost And 3Rd From The Left Buttons Down, And Switch Power On. (In The Above Image Devices: Press White And Yellow Buttons And Switch On)
Statistics
Likes
8
Downloads
0