Fully printable carburetor (for gasoline engine)

Description

This Is My Fully 3D-Printable Carburetor Prototype. It Works Absolutley Great, As You Can See In My Video About It (Https://Youtu.Be/1K920Fg2Ray). It'S 12Mm In Diameter, Which Is Good For A Powerful 50Cc Two Stroke Or A 4 Stroke Up To 80Cc. Modify The Jet So You'Re Getting A 0,6Mm Hole For The Main Jet And A 0,3Mm Hole For The Pilot Jet. Print Rather Slow, (40Mm/S), Because The Parts Are Very Small. Print The Fuel Chamber Quite Hot (210°C) To Make Sure That The Layers Are Tight To Gasoline.

Statistics

Category

Tags