Wheel hub - 12mm hex to 5mm
Description
Wheel Hub That Mounts A Standard 12Mm Hex Rc Wheel To A 5Mm Shaft On A Nema17 Stepper Motor. After Printing, I Use A 6-32 Tap To Thread The Hole For The Wheel, And A Hole For The Set Screw. I Use Inexpensive 6-32 Machine Screws From My Local Hardware Store. I Could Try To Engineer The Threads Into The Part, But I'Ve Gotten Much Better Results By Just Adding A Small Hole Into The Part Where I Want The Threads And Then Thread Them With A Tap.
Statistics
Likes
10
Downloads
0