Alternate top case for Raspberry Pi with Razberry Z-wave module
Description
This Is A Simple Remix Of The Top Case Of The Excellent Pi Case At Https://Www.Thingiverse.Com/Thing:922740 . This One Is 2.5Mm Higher To Fit A Razberry Z-Wave Module Within The Case. I Removed All Of The Top Openings And Replaced Them With A Small Opening To Fit The Reset Button On The Razberry, Which Also Helps Support The Board. The Screw Holes Are Recessed 2.5Mm, So The 16Mm M3 Cap-Head Screws That Fit The Original Will Fit This. There'S No Vent Holes In The Case. I Print These With A Hex Infill And No Top/Bottom Layers So I Get A Nice Mesh Surface. I Wouldn'T Use This Without That, As It'Ll Have No Airflow.
Statistics
Likes
25
Downloads
0