Cup / Mug hanger
Description
A Simple Cup/Mug Hanger That Can Be Screwed To The Underside Of A Shelf That Hold 3 Cups Or Mugs. Printed In Pla At A Layer Height Of 0.2Mm At 100% Fill. Held In Place Under The Shelf With 2 Screws, The Length Depends On The Thickness Of The Shelf. Mine Took Just Under 2 Hours To Print. Update 18/1/18 - A Shorter 2 Cup Version Has Been Added For Those With Smaller Printers
Statistics
Likes
3303
Downloads
0