S hook hanger
Description
### Why I Bought A Horizontal Bar To Hang My (Empty) Camera Bags From, But Forgot To Buy The Hooks That Go With It. Rather Than Go Back To The Store I Spent Way More Time Designing And Printing The Hangers Myself. I Ended Up Printing Mine With Petg At 60% Size, 3 Perimeters, 15% Infill And 3 Top/Bottom Layers And They Hold Up Just Fine. ### Features * Can Accomodate A 40Mm Diameter Bar At 100% Scale * Designed For Strength (Chamfered Edges Make It Stronger...I Think) * Can Be Scaled Up Or Down In Your Slicer To Accomodate Other Bar Sizes * Shaped Like An "S" (I'M Really Stretching The Features Here) ### Instructions * Print It In Petg With Multiple Walls And Slow Speed To Get The Strongest Part. * Print Without A Fan To Get The Strongest Part. * No Supports Required * Prints Fine At 0.3Mm Layer Height, But Lower Heights Should Work Just As Well. ### Open Source As Always The Original Design File (Fusion360) Is Included, So Feel Free To Improve It (Or Learn From It)!
Statistics
Likes
12
Downloads
0