NEMA17 DSLR Slider
Description
Update 2: Remember To Use 3+ Perimeters When Printing, We Don'T Want The Parts To Tear Apart Alongside Our Beloved Camera :S Update: Oops! I'D Forgot To Add Some Files, Today I Added The Bearing Covers To Attach To The Carry, The Printed Linear Bearing Itself And The Idler For The Belt Idler Part. This Almost 100% 3D Printed Dolly Slider Is Thought To Be Built Using 16Mm Diameter Rods Salvaged From An Old Roller Switcase. The Model Performs Quite Well Dragging About 3 Kg Of Weigth Around. This Structure Is Meant To Be The Hardware Part For An Extensive Arduino Based Controller Featuring Multiple Options, Like Speed Selesction, Duration, Endstops, Etc The Ends Feature A Tripod Sized Hole Each, And Multiple M2 Holes Ready To Attech Endstop If Wanted/Needed You Will Need A Nema17 Motor, 1X M8-50, 4X M5-10, And A Few M3-10 Or M3-12 Screws. For The Pulley System, I Printed The Idler And Used It To Sleeve A 608Zz Bearing, And Bought The Gt2 Pulley And The Belt.
Statistics
Likes
52
Downloads
0