east3d gecko-mk3-e3d-hybrid part cooler ((UPDATED))

Description

This Is A New Hybrid Prusa Mk3-E3D-Remix Part Cooler For The East3D Gecko Corexy. Will Work With Titan Extruders And E3D V6 Setups. (This Is The New Prusa Mk3 Part Cooling Nozzle From Prusa3D.Com - Slightly Modified By Me. ) Mounting The Nozzle.-- You Will Need 2 M3X6Mm Screws Or 5Mm Should Work. ((( Updated))) Added A No Name Version. Added A !Hot! Version. Now Nozzle Air Direction Walls Are A Bit Thicker(Easier To Print) Added A 0.2Mm Thickness To The Outer Body Wall Behind The Blower Fan. (Helps With Thin Wall For The Bottom Screw)

Statistics

Category

Tags