CNC Acrylic Gear Train
Description
This Gear Train Was Designed From Scratch As A Gear Desk Toy. If Cut Properly, Minimal Drilling Should Be Required To Use Two M4 Bolts And Washers (Or 8-32) And Thread Them Into The Gear Train Base. If You'Ve Got Similar Materials On Hand, Use The Provided G-Code To Cut Your Own. If Not, You Can Still Get The 3D Model And Put It Through Cam Yourself. Created To Be Cnc'D; Milled On The Sienci Mill One. Material: 6Mm Acrylic End Mill: 2-Flute, 1/8″ Flat End Cutting Time: 14 Minutes
Statistics
Likes
25
Downloads
0