3D-printerbed calibration
Description
This Nice Printerbed Calibration Is Designed With Freecad. I Have Designed This For My Craftbot Plus Printer But It Can Be Used For Every 3D-Printer Ofcourse. You Can Use And Adapt This Design For Your Own Needs. I Have Added The Freecad-File Also. The Original Size Of My Design Was For A 250X200 Printerbed, But Because I Use A Glass Bed I Have Made It Smaller: 190X140. Overall Thickness Is 2Mm. The Thicker Calibration Tabs Are All 5Mm. How To Use It: Just Print It And Measure The Heights In All Corners To See If They Have The Same Height. Also Look At The Flat Surfaces: They Must Be Looking Good And Flat Too. Adapt Your Bed If Needed And Print It Again If You Like.
Statistics
Likes
2
Downloads
0