Ultimaker original UMO(+) Feeder damper

Description

Inspired By Frederik Brückners Design (Https://Www.Youmagine.Com/Designs/Ultimaker-Original-Or-Plus-Feeder-Damper) And The Spring Socket From Ataraxis I Designed This Feeder Damper. Print Platte_Final.Stl And Extruderdaempfer_Halter_Final.Stl In Pla And Gummidaempfer_Extruder_Final.Stl In Flex Material (I Used Polymaker Polyflex). Because Of The Inlayed Plate The Mounting Is Much More Stronger. You Can Give The Connection Between Feeder An Damper A Bit More Stabilization If You Insert 2 Pieces Of Filament (2,85 Mm) In The Given Holes Of The Rubber Part. Additional Parts: 4 M3 Nuts And 4 M3 Screws

Statistics

Category

Tags