MP Select Mini V1 - Hotend Sock Mold
Description
This Is A Very Rudimentary, But Functional, Mold For Making A Hot-End Sock To Fit The Stock Hot-End That Comes On Monoprice'S Maker Select Mini And Other Malyan M200 Derivatives. The Process Is Similar To That Shown In This Thing: Https://Www.Thingiverse.Com/Thing:1655134 I Am Uploading This At The Request Of Another Mpsm User Who Needs Replacement Hot-End Insulation, But Be Aware That It Is Not By Any Means A 100% Finished And Polished Design. As It Is Now, There Is A Clearance Issue On The Lower Leading Edge Of The Sock That Requires Trimming In Order For The Stock Fan Shroud And Duct To Fit Correctly. The Relatively Long Unsupported Segment Of The Sock That Hangs Behind The Nozzle Also Tends To Sag Slightly. In My Case This Doesn'T Cause An Issue, But If Your Mileage May Vary. For The Ambitious, I Have Also Included The Original Step Files As Exported From Fusion 360, In Case You Want To Remedy The Shortcomings Of This Version And Share It On To Others, As Well As A Step Model Of The Hot-End Proper If You'D Rather Start From Scratch.
Statistics
Likes
1
Downloads
0