Ruler stop for steel ruler / Linealanschlag für Stahlmaßstab (25mm)

Description

First, This Thing Is Inspired By Https://Www.Youtube.Com/Watch?V=L-To0Nui0Pc&T= - Use Some Sandpaper To Finish - Perhaps You Have To Scrape Some Abs With A Knife At The Recess For A Tight Fit - Cut A M5 Thread In The Hole At The Part Without The 1Mm Recess - Some Black Spraypaint - With A Strong Abs Glue, Bond The Two Parts Together (Line Up The Holes With A Set Screw) - I Used A Set Screw From An Old Miter Saw (15Mm In My Case, 20Mm Max.) Be Careful When Tightening The Screw. Its Only A Plastic Thread!!! Edit: I Add 2 Thumbscrew´S (M5 Imbus And Countersunk). You Can Glue It In Place With Epoxy Or Fix It With A Nut. Also I Add Another Version Of The Ruler Stop. Now You Can Insert An M5 Nut.

Statistics

Category

Tags