Miniature Standard-Lamp Lithophane
Description
Here Comes My Lithophane Miniature Lamp! This One Is Designed To Attach A Switch And A Light Source. In Case You Want It Without The Switch Let Me Know In The Comments. Instructions: - Use The Attached Jpeg As An Original For The Correct Dimensions Of The Lithophane. - Change The Image To Whatever You Like (Keep The Format!) - Go To Http://3Dp.Rocks/Lithophane/ - Upload Your Image - Select "Outer Curve" - Go To Settings > Model Settings > Maximum Size (Mm) > Set It To 300 Mm - Go To Settings > Model Settings > Curve > Set It To 360 - In Case You Did Not Upload A Negative Image: Go To Settings > Image Settings > Positive Image - Click "Model" On Top Of The Page - Hit "Refresh" Button - Hit "Download" Button To Download And Print Your Personal Lithophane Printing: - I Recommend Printing The Parts Orientated As They Are Downloaded - Don'T Forget The Supports When Printing Your Top_Plate Selecting The Light Source: - Take The "Adapter_Piece" File (Sldprt Or Stl) And Modifiy It So You Can Attach Your Own Light Source. - The Adapter Piece Is Designed To Fit On The 3 Holes On Top Of The Litho_Mount-Plate - You Can Use The Abatements To Drill Your Own Holes In The Adapter Piece Switch: - 21X15 Mm - Https://Www.Aliexpress.Com/Item/10Pcs-Lot-21-15-Mm-2Pin-Kcd1-Boat-Rocker-Switch-Spst-Snap-In-On-Off-Position/32812315766.Html <H3>Let Me Know, If You Made One ;-) </H3>
Statistics
Likes
302
Downloads
0