Tevo tarantula cover and cable management
Description
It'S A Cover Set I Made For My Tevo Tarantula To Hide Cable And Add A Filament Runout Sensor Cover Is Made For 80Mm Fan I Had A Few Of These So Why Not Use Them Read Further Down I Forgot Some Hole I Will Update Later Screw The 2 6Mm Spacer Into The Cable Cover Bottom (The 2 Middle Holes) Screw The Other 2 6Mm Spacer In The 2 Bottom Spacer Of The Tevo Back Cover Optional You Can Add The 2 Nut And Screw To Fix The 2 Side Cover Into The Cable Bottom Cover Need To Drill 2 Holes On The Cylinder I Forgot To Screw 2 M3 10Mm To Hold The Upper Cover Need To Drill 2 Holes In The 2 Small Backet To Hold The Middle Cover Bom 4Xm5 35Mm 4Xm3 15Mm ( Stock Screw Can Be Use ) 6Xm3 10Mm 2Xm3 16Mm Optional 2Xm3 Nuts Optional 4Xm3 6Mm Spacer 5Xm4 12Mm Or 10If Using Dual Filament Sensor 2Xm2 15Mm Or 4 If Using Dual Filament Sensor That The Z Bracket I'M Using Https://Www.Thingiverse.Com/Thing:2450575 Runout Filament I Used As Source Https://Www.Thingiverse.Com/Thing:2665162
Statistics
Likes
9
Downloads
0