First Layer Test
Description
These Models Were Designed In Order To Allow Users To Test Their First Layer Adhesion And Quality. The Model Is 0.3Mm Tall So It Should Use Much Plastic, While Allowing You To See If Your Bed Is Properly Leveled Or If Your Leveling Sensor Is Working Properly. The Model Has A 20Mm Gap Between The Edge Of Your Bed And The Edge Of The Model In Order To Avoid Clamps And Other Objects Close To The Edge. I Have Uploaded Some Models That You Can Print Depending On The Size Of Your Bed, But If The Size Of Your Bed Is Not In The List, Leave A Comment And I Will Generate A Model For You. If I Am Not Around To Do It, You Can Always Do It Yourself By Changing The Bed_X And Bed_Y Variables Of Any Of These Models And Then Exporting It: Https://Cad.Onshape.Com/Documents/74818A0A723817591D5Eb505/W/D45F620E406D2Af899F10457/E/301D2B165907Eeb45Febb033
Statistics
Likes
15
Downloads
0