Fume Extractor V2
Description
This Is A Solder Fume Extractor. This Is An Improvement Over The Version I'Ve Made A Few Years Ago That Can Be Found At Https://Www.Thingiverse.Com/Thing:724350 . Only The Base (Stand) Is Changed. I Lowered It And Made The Base Larger To Improve Its Stability. This Fume Extractor Uses Carbon Filters Of 130Mm X 130Mm X 10Mm. These Are Used For The Hakko 491/493 Fume Extractor. To Build It, You'Ll Need: - 2 X Carbon Filters Of 130Mm X 130Mm X 10Mm. - 1 X 120 Mm 12V Computer Fan - 1 X Kcd1-101 Switch - 1 X Dc Barrel Power Jack Like The Prt-00119 From Sparkfun - 4 X 6-32 Screws Of 1.5" In Length (38 Mm) - 4 X 6-32 Nuts - Some Electrical Wires You Also Need A 12V Power Adapter With A 5.5 X 2.1 Mm Plug To Power It. You Should Not Need Support Material To Print It.
Statistics
Likes
23
Downloads
0