Wolfwhoop wt02 Mount
Description
Little Flat Mount For The Wolfwhoop Wt02 Camera. Flat Mount. Two Ways You Can Make It Work: 1: Print It At 102-103 Percent -Or- 2: Print It At 100 Percent, Carefully Jam It In (It'S Really Tight) Then Run The Camera For About 20 Minutes. The Camera Gets Hot, The Plastic Softens A Bit, And Then It Fits Perfect! Be Careful If You Choose The Second Method As You May Ruin The Camera By Breaking Off The Delicate Surface Mount Parts.
Statistics
Likes
2
Downloads
0