Power-Up Mushroom
Description
This Is A Work-In-Progress. It Was Modeled Very Quickly, For My Own Personal Need, And Is Not "Production" Quality. The Assembly, In Particular, Is A Little Fiddly. You Will Require A Mallet And A Short Dowel To Push The Individual Coloured Pieces Into The Base. You Will Also Require An Adhesive To Adhere The Front-Most Pieces Of The Mushroom-Cap To The Base. An Emery Board Will Also Be Useful, To Smooth Out Edges On The Blocks. You Will Require The Following Pieces To Complete The Mushroom: * 1 X Base_Black.Stl (Black) * 1 X Face_White.Stl (White) * 1 X Cap_White.Stl (White) * 1 X Cap_Red.Stl (Red) * 6 X 2X1.Stl (White) * 6 X 3X1.Stl (White) * 2 X 5X1.Stl (White) * 10 X 2X1.Stl (Red) * 1 X 4X1.Stl (Red) Use The Image With Grid, In The Gallery, As A Reference For Placement Of The Pieces.
Statistics
Likes
5
Downloads
0