Batisfera
Description
This Is An Evolution Of My Previous Model: [Batisfera Sketch](Https://Www.Thingiverse.Com/Thing:2367562) **Print This Model Only If You Know How To Setup The Supports And Remove Them Carefully.** The Model Has Holes In The Elements For Connection, And By Scaling The Connectors You Can Adjust Joints Tolerance. Connectors Has 80% Scale By Default. **Use Drop Of A Glue To Fix The Joints**, In Any Case. *(Full Connector/Hole Size Is 10X4X2Mm, With 100% Scale, In Case You Need To Know)* The Wheels In The Split Model Are Floating "In The Air" To Have Better Layers Pattern/Specular After A Print. Of Course, The Supports Are Necessary. So In General, **You Need To Print** One Of Each: - Batisfera_Body_Optimized_Repaired.Stl - Batisfera_Wheels_Optimized_Repaired.Stl - Batisfera_Jointsscale80_X5_Repaired.Stl (Or Batisfera_Jointsscale90_X5_Repaired.Stl) Good Luck! Like It? Print It! Share It! ----------------------------------------------- *Want To See More Models? Press The* [**Tip Designer**](Https://Www.Thingiverse.Com/Thing:2737237#Tip) *Button! Every $ Will Be Spent On A Pizza For Another Sleepless Night, When A New Model Is Born! Thanks In Advance!* ___________________________ **Update 2018-01-04:** - Joints X5 In 80% Scale Added, Looks Like They Fit Much Better Than 90% Version - Single Joint Model In 90% Scale Removed, Scale And Use 100% Model Instead - Full Set Model Removed **Update 2018-01-02:** - Complete Joints Rebuild, Now It Will Be Possible To Adjust Joints Tolerance - Single Joint Model Available, In 100% Scale (Scale Down Manually To Fit The Holes In The Joints) - Single Joint Model Added, In 90% Scale (By Default) - Full Set Model Added, With All Needed Elements In One File **Update 2018-01-01:** - Solid Model Updated - It Was Not Optimized Version, Sorry **Update 2017-12-31:** - My First Test Showed, That The Joints Are Pretty Bad, And I Need To Improve Them. So Wait For The Updates!
Statistics
Likes
63
Downloads
0