Bluray, PS3 and PS4 game case stand (extensible)

Description

Needed Proper Way To Store My Bluray Discs And Wanted To Try To Design An Stand For Them. Behold, This. Holds Minimum 6 Discs, Maximum Don'T Know. I Guess Few Hundreds Or Thousand, Depending How Well The Plastic Holds Up :) One Goal I Had In Mind Was That It Should Be Extensible. Also Preferably No Screws And No Glue Needed. Both Goals Succeeded, Although Glue Wouldn'T Hurt When Building A Larger Stand. The One I'Ve Built Has Now Over 100 Discs Loaded, With Room For 20+ More. And To Go Beyond That, I'Ll Just Print More Parts. The Thing Is Sturdy Enough To Tolerate Lifting By Myself, But It'S Evident That Adding More Discs Will Cause Something To Break Quite Soon. Still, I'M Positively Surprised How Rigid It Is. What To Print? First, Select Beams You Want To Print, 6 And 9 Slot Beams Are Available. Let Me Know If Other Options Are Needed. For The Bare Minimum Stand: - 1X Stand2_Foot_Left.Stl - 1X Stand2_Foot_Right.Stl - 2X Stand2_Plate_Left.Stl - 2X Stand2_Plate_Right.Stl - 1X Stand2_Side_Beamx_Left_Slots.Stl - 1X Stand2_Side_Beamx_Right_Slots.Stl - 1X Stand2_Back_Beam_X.Stl - 2X Stand2_End_Cap.Stl - 1X Stand2_End_Cap_Back.Stl To Extend The Stand Upwards, Print More: - Stand2_Side_Beamx_Left_Slots.Stl - Stand2_Side_Beamx_Right_Slots.Stl - Stand2_Back_Beam_X.Stl - Stand2_Plate_Left.Stl - Stand2_Plate_Right.Stl To Extend The Stand Sideways, Print: - Stand2_Foot_Joined.Stl (One Per Column) - Stand2_Plate_Joined.Stl (One Per Column Per Beam Count + 1) - Stand2_Side_Beamx_Middle.Stl (One Per Column Per Beam Count) - Stand2_Back_Beam_X.Stl (One Per Column Per Beam Count) - 1X Stand2_End_Cap.Stl - 1X Stand2_End_Cap_Back.Stl

Statistics

Category

Tags