BeeRotor 180 Camera, VTX and 20x20mm FC Mounts
Description
Camera Mount Designed For Vibration Dampening, Vtx/Led Strip Holder, And 30.5X30.5Mm To 20X20Mm Flight Controller Mount For The Beerotor 180 Frame. Read My Full Build Guide Here: Https://Nathan.Vertile.Com/Blog/2017/12/27/Omnibus-Nox-Flight-Controller-180Mm-Build/ The Camera Mount Should Work With Any Board Cam With 2 Small Holes In The Front On Either Side Of The Lens, For Example: Http://Bit.Ly/2Zmlgkp Any Small, Flat Vtx Will Work, Such As: Http://Bit.Ly/2Ligoj6 Any 10-Led Rgb Led Strip Should Work, Such As: Http://Bit.Ly/2Cqioq0 Any Flight Controller Will Work, But The Offset Flight Controller Mount Is Designed To Leave Enough Space For The Nox Flight Controller. You'Ll Need: 2X 2Mm (3-5Mm Length) Screws To Attach The Camera To The Mount 2X 2Mm (3-5Mm Length) Screws To Attach The Led Strip To The Mount 8X 3Mm (3-5Mm Length, Depending On Frame And Flight Controller Thickness) Screws To Mount The Flight Controller I Added Supports With Mesh Mixer And Printed It Vertically In Petg With .2Mm Layer Height And 4 Walls
Statistics
Likes
2
Downloads
0