adding prescription lens to Eachine EV100 goggles
Description
I Wanted To Add Prescription Lens To My Eachine Ev100 Goggles I Have Printed This Cutting Maker I Took An Old Plastic Prescription Lens With A Close Diopter To My Current Prescription. I Have Found The Estimated Center Of The Lens And Marked It With A Marker. Then I Draw On The Lens The Cutting Border With The 3D Part. After That, I Have Used A Grinder To Grind The Lens To The Marked Borders. After Washing The Lens From The Plastic Dast ' I Have Pushed The Lenses To The Goggles, And Fine-Tune The Diopters With The Ev100 Diopter Tuner This Is Work With Plastic Lenses Lens Size Is : 26X17.5 Mm With 2 Mm Radius
Statistics
Likes
16
Downloads
0