Taz 3-5 MW SE450-24 Power Supply Hanger
Description
I Am Using A Newer Power Supply Cover Which Is Better Than The One Show Here. See Https://Www.Thingiverse.Com/Thing:2749666 For The Power Supply Side Mount Cover. This Is A Hanger To Get The Mean Well Se-450-24 Power Supply I Use On My Taz 4 Off The Table And Mounted On The Side Frame. The A/C And Dc Cables Are Clamped In Spare Holes On The Back Side Of The Power Supply. The Hanger Leaves About 6Mm Between The Power Supply Case And The Taz Frame. You Will Need 8 M4 X 12 Mm Screws And 4 T-Nuts Besides The Hanger. 2 Clamps For Tying Down The Power Cords To The Side Of The Power Supply On The Rear Side. I Used Petg, .30Mm Layers 30% Infill. Abs Or Pla Should Be Fine Also.
Statistics
Likes
0
Downloads
0