AnetA8 / Infitary (M508) Flexion Extruder Mount (v5.0)

Description

Started With Https://Www.Thingiverse.Com/Thing:2185533, Then Added My Parts. Update 4: Some Days I Wonder Why I Try... So The Probe Hole (Lol...) Was Not The Right Diameter, Waay Off.. That Is Fixed And Has Been Moved Beside The Radial Fan. Speaking Of The Radial Fan, I Somehow Removed One Of The Screw Holes For The Mount, That Is Now Back. Also (Attempted To Give) Better Air Flow For The Hotend Fan Update 3: Got It Printing Almost Better Then My Mk2S. Re-Worked The Model To Look Better And Move A Few Small Things. Added A Probe Hole (Heh...) For An 8Mm Inductive Probe. Moved The Text And Added More. Moved Things Around For Better Movement Of The Air From The Hotend. ~Some Time Later~ Update 2:So, I Made Another Bonehead Move. The Radial Fan Mount Was Close To But Not Part Of The Extruder Mount, Needlessly Causing Instability Of The Whole Thing. I Also Moved Part Of The Radial Fan Mount To Allow Better Pass Trough Cooling Of The Hotend. Fixed In A New Version (Aneta8_Flexion_Extruder_Mount-V3_Repaired.Stl) Update: Cooling... Thats Important. I'M Not Sure If You Noticed But The Fan Doesn'T Really Blow The Warm Air Anywhere. It Just Hits The Back And Kinda Whirls Around Just Getting That Hotend Hotter And Hotter Until Blamo! Something Happens And Stuffs Broken. So I Have A New Version (Aneta8_Flexion_Extruder_Mount-V2_Fixed.Stl). A Better Version. A Version That Will Rule Over All Versions Before It. It Will Be So Good... As Long As I Didn'T Miss Something Important Again... This Version Just Rotates The Way The Hotend Sits 90 Degrees. And Lowered It Because The First Version (Pfft That Version Was A Little B***H) Had The Nozzle Pretty Much Even With The Backblate And The Side Carriages Wouldn'T Be Able To Go Low Enough To Get That Nozzle Down There. Tl:Dr Rotated The Hotend 90 Degrees, Lowered It By About 8Mm (I Think). More Pictures To Come Shortly.

Statistics

Category

Tags