Anet A8 Bowden Motor Mount Adapter Axis (like Cr 10) V1.2

Description

Edit 2: I Made One For The Airtripper Extruder (Https://Www.Thingiverse.Com/Thing:126778) Aswell Edit: I Republished This Thing Just To Upload The Final Version That Actually Works As It Should And Added Some Relating Pictures On The Way. This Is An Adapter For Mounting The Stepper Motor To The Right Side Of The X Axis Frame While Using A Bowden Setup. I Created This Cause I Ran Into Some Problems With The Original Setup When Printing In The Last Third Of The Build Height. With This Adapter The Stepper Is Mounted To The Side Of The X Axis, Inspired By The Cr 10'S Design, So Its Moving Along With The Z Axis Height, The Pressure In The Bowden Tube Stays The Same Over The Whole Print. My Design Is Made To Fit Those Two(Three) Upgrades: The X-Axis Tensioner: Https://Www.Thingiverse.Com/Thing:1683070 The Bowden Motor Mount, Fit For The Anet A8: Https://Www.Thingiverse.Com/Thing:2204941 The Airtripper Extruder: Https://Www.Thingiverse.Com/Thing:126778 Just Use Longer Screws To Fit The Adapter To The X-Axis Tensioner, Two Nuts To Secure It And Two Stock M3 Screws To Screw The Motor Mount To The Adapter, Thats It. For The Airtripper You Need Bigger Screws, Not Sure What Diameter Though. Happy Printing ;) Made It For Use With M4 Nuts For Better Use With The Belt Tensioner. And Changed The Position Of The Extruder Motor To The Front, So Now We Can Use The Actual Z Height ;) Push Fit Was Blocking Last 30Cm When Mounted In The Back, Now It Works. Really.

Statistics

Category

Tags