Wall mounts for Ikea Socker Plant Pots
Description
A Variety Of Wallmounts For 10- And 12Cm Ikea Socker Sheetmetal-Planters As Well As A Matching Wallmount For Standard Glass Bottles (0.5L, German Alu Screw Caps). Most Are Intended For Use With An Automatic Irrigation System Based On Porcelain Cones And Contain A Hook To Retain The Feeding Tube. There Also Is A Version Of Every Kind With A Hole For Mounting A Hook, So You Can Add A Stick Or Piece Of String To Help The Plants Climb Upwards. The Bottle Mount Is To Be Used With Ikea Sirup Bottles That I Had On Hand. They Just Screw In And Can Be Used As Water Supply For The Irrigation System. Remember To Mount The Bottle In A Way That The Water Level Is Below The Lowest Irrigation Point, Otherwise Your Plants Will Be Flooded... ;) All Parts Are Printable Without Support In Abs/0.2Mm Without Raft. The Mounting Plate Should Be Positioned Flat On The Heatbed. Drilling Templates Provided! Edits: - 06.01.2017 - Revised 10Cm-Holders, As The Inner Diameter Was Slightly Larger Than Expected, Old Version Worked Too, Tho - 12.01.2020 - Edited The Standard Drill-Tremplate, As The Dimensions Were Cleraly Wrong. Also Added A Pdf Of The Drill Template.
Statistics
Likes
7
Downloads
0