3 Rail Track Power Block
Description
This Thing Is A Power Block That Provides A Plug-In Receptacle For A Lionel Dc Power Supply. I Purchased Some 3-Rail Track But Did Not Have Any Power Connector Sections Or Clamps. So I Soldered Some Wires (18 Awg) To The Three Rails And Then Soldered The Ends To A 2.5Mm Power Connector. The Lionel Power Supply Uses The 2.5Mm Power Plug. This Thing Hides/Protects The Wiring And, Makes The Connection To The Track Look Nice And Neat. You Can See That It Is Also Plugged Into The Switch That I Made And Can Be Found Here On Thingiverse.
Statistics
Likes
8
Downloads
0