Anti Z-Wobble for M8 Lead Screw - Geeetech I3 ProB (not for Anet A8)

Description

This Is Another Anti Z-Wobble Accessory. I Wasn'T Satisfied With The Designs I Found On Thingiverse. I'Ve Tried 2 Of Them And It Was Necessary To Post-Process Them With Sand-Paper Or A File. That Is Why I Made One Myself. This Is For The M8-Brass Nut That Came With Your Printer. Every Version Works But Please Use V3. V1 And V2 Need Support Under, And These Are More Bulky => Material Waste. V1 Uses 2680 Mm Filament / 2Pcs V2 Uses 1560 Mm Filament / 2Pcs V3 Is The Most Lightweight And Best At Reducing Z-Wobble Ca. 840 Mm Filament / For Both Pieces With 30% Infill Ca. 25-30 Min Print Time Here Is Also The Onshape Link For Who Is Interested How I Designed The V3: Https://Cad.Onshape.Com/Documents/13B74F353E231A472B213C9E/W/24Be6Bb126F6166E793852De/E/7Cc0B1047F20E9Ff1Dfaa3B1 This Is Not For Anet A8 Because The Brass-Nut Must Be Mounted Below The X-Axis For This Accessory To Work. The Two Guide-Feet Doesn'T Support The Weight Of The X-Axis. Who Also Has A More Bent M8-Rod, I Recommend The Following Part Designed By @Aurhe For The Same Printer: Https://Www.Thingiverse.Com/Thing:1975163 I'M Using Both Parts The One From @Aurhe For Isolating The Top Of The Rod And The V3 Of My Design For The Driving M8-Nut Under The X-Axis Sled. I Wish You Happy Printing Without Z-Wobble

Statistics

Category

Tags