Hyperlite Floss 2 - Lumenier AXII mount
Description
I Struggled To Find A Mount That Worked For How I Wanted The Antenna To Mount. I Went Through 13 Different Versions Of Mounting The Antenna Because I Wanted To Have It Come Out The Back. Plus I Wanted The Antenna To Be Far Enough Away From The Battery To Get Good Signal. I Have Not Liked Any Of Them. I Am Ok With The Final One. I Would Have Save Myself A Lot Of Time If I Had Just Used The Antenna Mount That Kabab Designed Into The Frame. I Have A [Tbs Unify Sma Pigtail](Https://Www.Amazon.Com/Team-Blacksheep-Unify-Pigtail-5-8Ghz/Dp/B01N6Vq7Gm/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1515344306&Sr=8-1&Keywords=Tbs+Unify+Pro+5G8+Sma+Pigtail&Linkcode=Sl1&Tag=Rapnit-20&Linkid=14Ceef60Ab5Cbcf788Fe661F050Ebd47) That I Cut The Tabs Off The End To Save Some Weight So I Could Get The Square That Is On The Back Of The Mount. The Final One I Landed On Was 20Deg Tilt Printed Out Of Pla. There Are 4 Different Mounts In The Skp File Attached. 7.5Deg, 15Deg, 20Deg, 25Deg The Quad Build Is At [Rotobuilds](Https://Rotorbuilds.Com/Build/5524)
Statistics
Likes
27
Downloads
0