Racing Wheel Stand
Description
Xbox Racing Wheel Stand For Thrustmaster Racing Wheel Ferrari 458. Likely Can Be Adapted To Other Wheel Types/Brands. Red Parts Were Printed With Alloy910. Black Parts Were Printed With Petg. All Code Provided In Openscad. Some Notes / Thoughts: - The Feet Are Wrapped With A Mouse Pad Cut To Fit. Used Double Sided Tape To Wrap Around Foot And Screwed On The Fabric Covers To Fasten. - Code Is What It Is, Not Exactly Enterprise Quality But Included For Your Enjoyment. - Should Be Easy To Swap Out Aluminum Tubes For Cheaper Stuff Like Broom Handles By Modifying Openscad. - Although The Threads In The Front Axis & Peddle Attachment Are Included In The Stl'S They Don'T Print Well Enough To Function. I Drilled Them With An M10 Tap. - You Can Print The Screws Or Use An M10. I Found The Printed Screws Worked For The Peddle Attachments, Front Axis & Telescopic Tube But Did Not Work For The Wheel Attachment (Alloy910 Broke When Tightened). - I Included Supports In The Stl Where Required As They Are Easier To Remove Than Auto Generated. - You'Ll Need An Old Mousepad (Or Two), M10 Tap, 1 M10 Screw, 1 M10 Nut, And Aluminum Tubes (Home Depot) For The Build. - It Will Likely Be More Expensive To Build This Than Buy Something Proper On Amazon.
Statistics
Likes
60
Downloads
0