VEX Robotics Match Controller and Raspberry Pi Case V3.0
Description
Udate: V3.4 - 2-1-18 Fixed Vesa Mount Hole Tolerancing To All For A Better Clearance Fit With Hardware On Pt 1 Fixed 75 Mm Vesa Mount Hardware Head Toleranceing With Case Frame On Pt 1 Update: V3.0 - 1-7-18 Fixed Alignment Tolerancing Of Part 2 With The Pi I/O Ports Added Support For 75 X 75Mm Vesa Screen Mount. Added Alignment Blocks For Easy Case Assembly Improved Mounting Point Hardware Spacing Improved Sd Card Access Improved Visibility On Match Controller Status Lights Note: Part 1 And 3 From Version 2.0 Are Compatible With Part 2 Of Version 3.0 However There Will Be Some Cosmetic Misalignment, It Is Recommended To Use Only Version 3.0 Parts Or Only Version 2.0 Parts. Raspberry Pi 3 And Vex Robotics Match Controller Mount To Attach To The Back Of The Vex Field Monitor Stand Or Standard 100 X 100 Mm Vesa Screen Mount Or 75 X 75 Mm Vesa Screen Mount. Part 1 And 2 Are The Components That Make Up The Case Part 3 (Optional) Is Just A Field Identification Tag That Could Be Customized Per Event, A Few Options Are Provided. Required Hardware: 4X 8-32 X 7/8" Socket Head Cap Screws (Attach Case Top And Bottom Shells) 2X 8-32 X 1/4" Optional Mounting Hardware For Part 3 4X 4-48 X 1/4" Socket Head Cap Screws (Attach Pi To Case) 4X M4 X 0.7 X 8 Mm Socket Head Cap Screws (Attachment To Vesa Mount Or Field Monitor Bracket) Standard 8-32" Vex Screws Can Be Used To Assemble The Case. I Believe A M4 Socket Head Cap Screw Could Replace The 8-32 Machine Screws, However I Have Not Personally Tried That. Assembly: Part 2 Should Have 4 Clearance Holes For 8-32 Screws Part 1 Should Have 4 Interference Fit Holes For 8-32 Screws To Thread In The 8-32" X 7/8" Screws Should Slide Though Part 2 And Through The Vex Match Controller And Thread Into Part 1 Joining The Top And Bottom Half'S Of The Case Together (See Pictures)
Statistics
Likes
12
Downloads
0