EnLight - LED light for the Creality Ender 2
Description
*[Make. Break. Repeat! On Facebook](Https://Www.Facebook.Com/Makebreakrepeat/): Updates On Tuesdays And Thursdays!* The Enlight Is Meant To Be Used With (Usb) Led Strips. The Light Bar Can Be Turned To Change The Angle At What Needs To Be Lid. Cheap Led Strips Usually Don'T Stick Well Which Is Why I Added Friction Fit "Clipper" Clips To Keep The Strips Inside The Light Bar. Be Sure To Watch Out For The Cable Slot When Installing The Light And Please Use 10Mm Velcro Strips For Cable Management. The Camera Mount Should Work For Most Action Cameras But Had Been Modelled With The Sq11 In Mind For Which I Uploaded The Camera Mount Separately: [Sq11Mount](Https://Www.Thingiverse.Com/Thing:2715279) For The [Quelima Sq11](Https://Www.Amazon.De/Sportkamera-Sq11-Spion-Mikrokamera-Farbe/Dp/B06Y1Gdkxj/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1522942850&Sr=8-1&Keywords=Quelima+Sq11&Linkcode=Sl1&Tag=Makebreakrepe-21&Linkid=0Bb2Ddad32Ae2A262B291E5F93072E6E), [F60Mount](Https://Www.Thingiverse.Com/Thing:2840965) For The Furibee F60 4K. Use M5-25 Hex Head Screws And M5 Hex Nuts To Populate "Screw" And "Nut" Of The Camera Mount. I Recently Added Another Camera Mount For Action Cameras That Mounts To The Creality Ender 2 Bed: [Encam](Https://Www.Thingiverse.Com/Thing:2763056). There Is Also A Version Of This Arm For The Prusa I3 - [Prulight](Https://Www.Thingiverse.Com/Thing:2713519) - And One For The Creality Cr-10 Printers - [Crealight](Https://Www.Thingiverse.Com/Thing:2715307) - That Will Probably Fit Many Other Printers Based On Open-Frame V-Slot Extruded Aluminum Bars. I Might Add Shorter And Longer Light Bars In The Future.
Statistics
Likes
37
Downloads
0