Spiral Lamp with RGB LEDs
Description
I Created This Lamp To Make Use Of Cheap Rgb Led Strips. The Main Model Has Been Tailored To Fit <A Href="Http://A.Co/0Mswjiw">This Amazon Listing.</A> More Information About The Leds, The Model, Instructions, And Pictures Can All Be Found In The Appropriate Section Below. (Before Printing Anything, Please See The Instructions!) Feedback Means A Lot To Me, So If You Like The Design Or Make One Yourself, Please Let Me Know! Happy Printing! <B>Edit 3/14/2019:</B> There Were Some Concerns About The Plastic Core Overheating From Having All The Leds In A Tight Area, Especially With Pla. I'Ve Uploaded Modified Pieces That Allow For A Core Of 1/4'' (6.35 Mm) Dowel Rods To Be Used Instead. There Is Also A Hole In This Cap That Lets Warm Air Escape Out Of The Top Of This Lamp. The Lamp Shade For This Setup Has A Larger Internal Diameter, And Thus Fits More Leds As Well. I Have Had No Problems With This Setup Overheating. <I><U>If You Want To Print The Dowel Model, Print The Three Pieces Marked With "Dowel" In The Title, Then Print Either Base Plate.</I></U>
Statistics
Likes
185
Downloads
0