Simplified E3D V6 compatible X carriage for 3Dtje Mini 3D Printer
Description
As You May Know, The Stock 3Dtje Hotend Mount Does Not Have Properly Aligning Screw Holes, And It Also Uses A 40Mm Fan. Being Cheap, I Wanted To Design A Hotend Mount That Allowed Me To Use My Stock E3D Clone Fan Without Having To Buy A Special Fan. I Ended Up Designing, A Tiny Bracket That Allowed Me To Reuse My Stock X Carraige And Hold The Hotend In Place With The Proper Screw Hole Placement. However For One Reason Or Another, This Solution Was Very Very Loose, And Not To My Requirements. You May Find The Hotend Bracket In My Parts Pack Here: Https://Www.Thingiverse.Com/Thing:2721021 I Also Did Not Like The Orientation Of The Mounting, Which Made Things A Little Hard To Remove. So I Ended Up Desinging This X-Carriage Featured Here. This, Despite Not Fitting 100% Properly In My Particular Print, Is Extremely Rigid And Stable, Which Was What I Was Going For. Uses M3X20Mm Screws, Common Screws I Had When Assembling This Printer! **Things That Need Work:** * Does Not Have X Endstop Screw Provision Yet (I'Ve Not Been Using Endstops So Far) * Hotend Groove Clearances Could Possibly Be Increased If You Print This Out, Please Take A Picture And Add A Make! Enjoy!
Statistics
Likes
12
Downloads
0