Customizable(in Onshape): Cork / Insulation Holder for Heated Bed

Description

23.07.2018 Update: After More Than 6 Month One Of The Rubber Bands Snapped, Changed It, Now Good To Go 6 More Month ;) 21.04.2018 Update: 3 Month And The Rubber Band Is Still Holding. 10.02.2018 Update: After 1 Month The Rubber-Band Ist Still Good. No Wearing Out. The Same As 1 Month Ago. So Everything Is Ok, With The Rubber Band. 12.01.2018 Update: V2 Is Ready: Here Is The Link: Https://Www.Thingiverse.Com/Thing:2754426 Leave A Comment What Do You Think. Which One Is Better V1 Or V2? ------------------------------------------------------------------------- I Made This Holder For Insulation Of The Heated Beds. With This Design, The Heated Bed Remains Adjustable. I Don'T Know How Long A Rubber Band Cand Withstand The Heat Of The Bed. If It Snaps In Lesser Than 3 Months, I Will Try To Make A 2Nd Version Which Solves The Problem. I'Ll Keep You Updated. You Will Also Need: 2X Elastic Bands \I Don'T Know How To Use Openscad, That Is Why I Choose To Make It Customizable In Onshape Under The Following Link: Https://Cad.Onshape.Com/Documents/E0Cbc82555Ef8Bc4A18Deada/W/9C1B01Fcf8745Db05D4Bb013/E/9905Fb48433535Fe11A1C53C You Can Customize It With Following Values: (The Uploaded Stl Has The Default Values) Pcb Heated Bed Width (Only Square) 100-400 Mm (Default = 215 Mm) Cork/Insulation Plate Width (Only Square) 80-380 Mm (Default = 180Mm) Cork/Insulation Height: 1.5-20 Mm (Default = 5 Mm) Distance From Pcb Edge To Hole 2-5Mm (Default = 3Mm) Hole Diameter 2-5 Mm (Default = 3.1 Mm) Spring Diameter 4.2-10.2 Mm (Also Fits A Washer) (Default = 7.2Mm)

Statistics

Category

Tags