Spool W/ Crank
Description
Spool I Designed To Wind Paracord Onto For Storage. Use A 1/2' Dowel For The Shaft. The Spool Ends Are Identical But You Will Need Two With The Bevel Facing Inwards. The Shaft Should Extend Through The Bottom Spool End Into The Centering Hole In The Bottom Of The Body And The Top Will Need To Be Below The Top Rim Of The Body. I Glued The Ends On To The Shaft. The Top Holes For Retaining Screws And The Crank Has A Hole For A Screw To Attach It To The Top Of The Shaft.
Statistics
Likes
0
Downloads
0