Project box customizer with lid
Description
This Is A Project Box Customizer Using Openscad. I Have Added Cutouts For Wire Access Or Port Access. To Access The Port Cutout Definitions Under The Customizer Click On The Hyperlink Title With A Down Arrow On The Top Left Of The Customizer Page For This Thing. As Of Nov 12Th, 2018 The Defaults Are For The Raspberry Pi 3+ <U><B>Updated Nov 12Th, 2018 To Version 1.4</U>Bug Fix On Posts</B> <U><B>Updated Feb 14Th, 2018 To Version 1.3</U> Bug Fix On Post #3</B> <B>Now Supports Chamfered Edges (Split Out To A New Scad Program Since Takes Longer)</B> <I>Note: Can Only Have 1 Scad Customizer, So Just Download The Chamfer Version</I> The Defaults Should Work For A Odroid-C2 Or Raspberry Pi But Only One Cutout Is Supported Per Sidewall So Make The Cutout Large Enough To Open Up All Devices/Wires You Need On Each Sidewall. <I>Note: Supports Cutouts On Each Of The 4 Side-Walls And Optional Vents On Top And Bottom Plates.</I> <U>Updates</U> <B>Updated Scad And Stl File: Jan 13, 2018 To Provide Vent Holes In Top And Bottom Plates</B> The Pcb Posts Are Optional. If You Choose To Do Them You Will Measure Them From The Closest Sidewall To The Center Of The Post. This Way You Can Measure The Pcb To Hole And Use That Measurement For Both X And Y. The Post Ordering Is Clockwise From The Closest To The Origin.
Statistics
Likes
38
Downloads
0