Zypher Rear Antenna Mount
Description
Rear Antenna Mount For The Zypher Fpv Racing Frame By Box'O'Props. You Can Purchase This Frame Here: Http://Boxoprops.Com/Zypher.Html This Antenna Mount Will Allow You To Bend Your Antenna To The Perfect Angle And Insure It Will Flex A Good Amount In The Case Of A Crash, Instead Of Ripping The Sma Connector And Antenna Apart Because It'S Firmly Mounted To The 5Mm Carbon Fiber. The Antenna Base On This Mount Is Designed For Any Number Of Antenna Attachments. The Standard Sma Mount With A Bolt On The Opposite Side, Or The Mount That Comes With The Tbs Unify. There Are Two Ways To Attach The Unify Mount. Run The Sma Connector Through The Mount From The Board Side And Attach It With Two 5 Mm M3 Screws Into The Mounting Plate. The Other Is To Detach The U.Fl Connector From The Unify Board, Run The Cable Through The Mount From The Back, Then Attach It From The Board Side With Two 5Mm M3 Screws Into The Mounting Plate. The File Is Made For The Original 25Mm Standoffs That Come With The Frame. If You'Ve Shortened The Standoffs, I'Ve Included A Step File That Should Allow You To Modify It To Your Liking Or You Can Just Slice The Bottom Off With A Really Sharp X-Acto Blade.
Statistics
Likes
2
Downloads
0