Boeing 737 MCP Korry-like switch for simulators
Description
I Have Been Modeling This Part For Long Time And My Plans Have Changed A Lot From Where I Started. Print Both Pieces Separately And Attach Tactile Switch On The Case (It Only Goes One Way). And Try To Push Korry Button To It I'M Using These Switches (Tactile 12X12X8Mm) Without Cap Https://Www.Ebay.Com/Itm/20Pcs-Momentary-Tact-Tactile-Push-Button-Switch-12-X-12Mm-X-8Mm-4-Pin-Dip-W-Cap/321057620566?Hash=Item4Ac0868256:G:A9Aaaoswbjdaospd You Can Also Attach 2Mm Square Leds To Button And Wire Them With Jst Style Connectors. Printing Needs Some Support, But Not Too Much If You Like To Have Quality. Print With Best Quality As Possible. Update 28.1.2018 - Added Collar For Better Connection For The Mcp Backpanel - Rounded Corners - Internal Size Now 17Mm And Outer 21Mm - Reduced Tactile Insertion Window Update 21.1.2018 - Cleaned Casing Model For Better Print Quality Update 18.1.2018 - Down Scaled Button A Little Bit - Increased Size Of Led Holes - Removed Unnecessary Clips On The Casing And Button As Tactile Switch Has Enough Holding Power - Increased Width Of Casing Bottom
Statistics
Likes
17
Downloads
0