Locust 5"
Description
The Locust 5" Is A Lightweight (60G With Necessary Hardware) And Rugged Race Oriented Quadcopter. Optimised For Cheap Production, Durability And Compatibility. The Loc5 Has A Size Of About 200Mm Motor To Motor And Uses An Outer 40Mm Hole Spacing, Allowing It To Be Widely Compatible With Many Shendrones Pods. I Like To Use The Skinny Screamer 40 Degree Pod With My Loc5. (The Stl File For The Skinny Screamer Pod Can Be Found In The Loc5 Thing Files. It Is Not My Design And I Take No Credit For It. I Have Only Uploaded This File To The Loc5 Page Because I Am Unable To Find And Link To The Original Listing For The Skinny Screamer Pod On Thingiverse.) The Pictured Loc5 Weighs 270G With Props And No Battery. This Weight Could Easily Be Decreased By Using Different Pods, A Micro Camera Or A 4In1 Esc. Carbon Fiber Cutting Instructions: All Locust Frame Parts Can Be Found Ready To Order On My Armattan Productions Store: Https://Armattanproductions.Com/Pages/Kit_Detail/1187 (I Use A 0% Commission Rate So My Parts And Frames Are As Cheap As Possible) - Loc5 Arm: 5Mm Cf - Locust 40Mm/30.5Mm Plate: 2Mm Cf 3D Printing Instructions: All Locust 3D Printed Parts Should Be Printed In A Flexible Filament Such As Tpu. - Loc5 Arm Guards: 100% Infill Optimal / May Need To Be Scaled Depending On The Accuracy Of Your Printer. - Skinny Screamer Pod: 100% Infill Optimal / Supports Required. Enjoy! Leave A Comment If You Have Any Questions. Note: All Of My Designs Are Free To Download, Print And Cut For Non-Commercial Use. Producing A Remix Of Any Of My Designs For Commercial Purposes Is Permissible As Long As Credit Is Given To The Original Design. Please Contact Me If You Are Interested In Using Any Of My Designs Commercially.
Statistics
Likes
13
Downloads
0