Prusa Mk3 Light Brackets
Description
Using This Light Some Details And Areas May Still Be Hard To See, Like Directly Under The Nozzle, But I Designed It For Checking On Prints. Either Checking In Person Or Via The Webcam It Provides Plenty Of Light, Without Leaving The Main Light On, To Make Sure I Haven'T Been Attacked By The Spaghetti Monster. Here Is A Link For The Light I Used In This Design. I'M Sure It Would Work With Others, But Was Specifically Designed For This One (Link As Of 1/15/17). Https://Www.Amazon.Com/Gp/Product/B00Laaucz2/Ref=Oh_Aui_Detailpage_O02_S01?Ie=Utf8&Psc=1 I Uploaded The Lid For The Switch Box As Well As The Complete File In Case You Have Tolerance Issues, You Can Scale And Re-Print Just The Lid As Needed. I Did Not Include Wire Holes In The Switch Box So It Could Be Adapted And Placed Wherever Someone Wants. For This Particular Light, Use A 5/32 Drill Bit To Drill The Holes. The Nut Hole In The Brakets Is Designed For A Hex Nut, As It'S What I Had Available, But Should Work With A Square Nut As Well. They May Just Be A Bit More Loose Until Tightened. The Screw Needed Should Have A Threaded Section Of 6Mm Or Shorter. The Screws I Used Were 6 Mm In Total Length, 5Mm Threaded. I Wired Directly Off The Mk3 24V Psu For This. As Indicated By The Product Description, It Will Also Work On 12V Power Supply.
Statistics
Likes
87
Downloads
0