Y motor bracket (Creality CR-10)

Description

This Is My Design To Install The Damper On The Back Of The Y Motor In Order To Keep Him Aligned. The Part Is Installed And Align Perfectly With The Step Motor. To Install This Part Together With The Damper I Used Two New M3X40Mm Bolts Between The Damper And The Step Motor, And Two M3X12Mm Bolts Between The Damper And The Bracket. I Also Used An M5 Bolt With A Half Nut In Order To Fix The Bracket To The Frame Of The Printer. This Part Is Designed To Print With No Support. I'Ve Used 75% Infill. Material: Pla.

Statistics

Category

Tags