Boldclash B06 flight controller (Inductrix size) adapter to 16x16mm Remix

Description

Remix Of "Boldclash B06 Flight Controller (Inductrix Size) Adapter To 16X16 Mm Stack". Thanks To _Mfer_ For The Original Design. Removed Some Material From The 16X16 Mount So The Flight Controller Will Sit Flush With The Adapter. I Tried Using O Rings On The Original Adapter, But The Flight Controller Sat Too High To Mount The Boldclash Canopy. I Recommend Mounting The Adapter On The Rubber Grommets That Are Included With The B06 Frame Kit. You May Need To Cut Some Material From One Of The Sides To Make Room For The 6 Wire Cable Between The Flight Controller And Esc (See Photo). The Adapter In The Photos Was Printed In Petg. I Did Not Weigh It Before Installing But It Should Weigh Less Than The Original (Less Material).

Statistics

Category

Tags