Key Guard 45 Cells Proloquo2Go for GoNow Rugged
Description
*Update. Re-Created Guard With No Overlap. A Small Channel On Top Of The Right Hand Side Allows Me To Use A Hand Held 3D Pen To Weld The Two Sides Together Using The Original Filament. Below Is The Direction For Making Other Proloquo Cell Configurations. Using The Ipad With Proloquo: 1. Take A Screen Shot Of A Blank 45 Cell Proloquo Board. 2. Edited The Picture In Ms Paint To Fill In The Areas Around The Cells With Black. 3. Uploaded The Picture To: (Online Convert.Com) Https://Image.Online-Convert.Com/Convert-To-Svg And Converted It To A Svg File. 4. Import Svg File Into Tinkercad At 19.336% (This Resizes The Svg File To The Exact Width Of An Ipad Screen. 5. Change Object From A Solid To An Empty And Place Over A Box With The Same Dimensions And Join The Two Item. This Make Your Template. 6. Change The Template From A Solid To An Empty And Center Over A Box With The Dimensions: 212.58 Mm X 165.10 Mm. 7. Join The Two Item. If You Have A Large Enough 3D Printer You Can Just Print This File. Otherwise Split Into Two Sides. This Is A Guard For An Augmentative Communication Device Made By Combining A Gonow Rugged Case And An Ipad 2 With The Proloquo2Go App 45 Cells And Message Window Size Set To Very Small. A Guard Helps Eliminate Accidental Activation By Touch Of Other Cells. I Connected The Two Halves Using A 3D Pen With The Same Filament. The Guard Is Held In Place By Its Outer Edge And Is Placed First Inside The Gonow Rugged Case Followed By The Ipad.
Statistics
Likes
4
Downloads
0