Measuring Tape Roller and Storage [Remix]

Description

Well, I Found The Idea By Chwalek880 Very Good. I Printed This Thing And During The Roll Procedure I Realized That There Could Be Some Kind Of Knurling To Get More Grip, While Rolling The Tape Inside The Container. So I Remixed This Thing And Placed Via Tinkercad Some Knurling To Get Better Grip. The Cointainer Is Well Done, So I Didn'T Change Anything Else, It Really Snapes Into Place. Edit: I Updated The First Version Because The Knurling Was On The Wrong Side, Now It'S Correct. :-) <H2>Print Settings</H2> Infill: 20% Layer: 0,2Mm Supports: No Rafts: No Nozzle: 200°C Bed: 60°C I Like To Use The Following Tape On My Cr-10: Https://Www.Amazon.De/Gp/Product/B000Ldc2Km/Ref=As_Li_Ss_Tl?Ie=Utf8&Psc=1&Linkcode=Sl1&Tag=Vapefreak-21&Linkid=C16Aa811Ca0904C1Ca66F45E2673A95B This Stuff Is Really Great, No Extra Glue Needed, 100% Sticky To The Printed Parts, Which Come Off Really Easily, Even Without Destroying The Tape. Have Fun! (Amazon Affiliate Links & Tips Enabled)

Statistics

Category

Tags