Geeetech G2S Hinged Front Panel Mount
Description
Because I Needed To Get At The Bed-Screw Behind The Front Panel To Level It, I Rapidly Got Fed Up Of Removing And Re-Installing The Mounts For The Lcd. The Attached Parts Are My Solution; A Simple Hinged Mount So I Can Tilt It Out The Way To Get At Parts For Measurement/Tweaking, Or Tap The Board Cooling Fan If It'S Buzzing Annoyingly Again. With The Hinge Installed, The Lcd Folds (Approximately) Flat When Needed, And Lifts Back Up To The Same Position As The Original Static Mounts When You'Re Done. The Stl Is A Slightly Tweaked Version As To What'S Shown In The Photos - The Front Mount'S Received A Slight Adjustment To Make It Stronger Around The Card-Slot, As I Was Giving It Too Much Clearance Like The Original. Also Attached Is An Stl For A Clone Of The Original Acrylic Static Mount, As I Snapped One Of Mine In The First Place After Having Removed And Reattached It Too Often.
Statistics
Likes
11
Downloads
0