Star Trek Bolivar class cut to print
Description
This Is A Cut And Ready To Print Version Of Outcastrc'S Star Trek Bolivar Class 1:2000 (Https://Www.Thingiverse.Com/Thing:2140965). I Have Printed The Ship At 250% Using Cura And That Puts It In Near Perfect Scale With Polar Lights 1/1000 Enterprise Refit, See The Pictures For Reference. No Support Was Needed For The Vertical Saucer Halves, I Doubt The Horizontal Saucer Halves Need It Either. I Used Primer Filler For The Saucer And I Lost Some Detail But It Was So Fine, You Would Be Unlikely To Avoid Losing It Without Printing At A Much Larger Scale. It You Have A Cr-10 S5, You Can Try Printing Th Ship At 1/350 Scale, I Bet That Would Sharpen The Detail. Be Very Patient When Gluing The Nacelle And Hull Onto The Saucer, I Used Epoxy Resin So I Would Have Time To Position The Pieces As Straight As Possible. I Would Be Careful With Super Glue. Remember 250% For 1/1000 Scale. The Saucer Should Be 143Mm-144Mm Wide.
Statistics
Likes
32
Downloads
0