Brocca
Description
Brocca The Idea Of This Model Is To Make A Spiral Object Like A Vase, But Also Useful. I Used Cura Engine On Repetier Host, And For The Red And Green Translucent Petg I Set A Temperature Of 220°C , A Shell Thickness Of 1 Mm, A Top/Bottom Thickness Of 1 Mm, And Spiralize Contour In General Extruder Setting. I Changed The Nozzle With A 0,8 Mm Nozzle And Set Layer To 0,3Mm. I Also Set Minimum Layer Time To 10 Seconds ( In Spiral Mode Is A "Turn" ), For Me Was The Best Layer Time To Avoid Deformations Of The Structure Without Cooling. Is Possible To Have The Same Result With A Little Percentage Of Cooling But Is Difficult To Set Right. The Result For Me Was Impressive ... I Scaled The Model X 2.1 ( In Photo ) And Contain About 1 Liter ( 1134 Cm Cube, 26 Mt Of 1,75 Mm Filament, About 2 Hours ). Broccaspiral.Stl : Normal Version. (Green In Photo, Minecraft Effect). Broccaspiralt.Stl : Turbo Smooth Version. (Red In Photo).
Statistics
Likes
269
Downloads
0