Wobble Fix for Geeetech Prusa I3 X Acrylic
Description
The Geeetech Prusa Range All Seem To Have The Same Wobble Issue. I Found Parts Suitable For The Metal Versions But Not The Acrylic, So I Designed These. The Picture Shows The Wobble Clearly, And If You'Re Not Convinced, See [This Video](Https://Youtu.Be/Kw_2Ifdpw_I) Of The Wobble! I Have Two Versions And One Uses Less Filament Than The Other, But The Other (I Think) Looks Nicer. The Two Stl Files Are Not The Exact Version I Have Printed As I Have Modified Them Slightly Further So They Avoid A Few Of The Screws (Which Mine Rub Up Against) *The First Printed Layer Contains A Small Rectangle Over Where The Rod Would Come Through. __You Need To Remove This__ After The Print, It Is There To Help That Section Remain Stuck To The Base While Printing* If You Want To See How (Badly) I Made Them, They'Re Both On Tinkercad As: [Normal Version On Tinkercad](Https://Www.Tinkercad.Com/Things/Cjtoipf93Vz) [Smaller Version On Tinkercad](Https://Www.Tinkercad.Com/Things/7Xyapzhnb0E) Hope You Enjoy Better Print Quality! Future I Might Mod This To Make It Thinner As Once The Screws Are Tightened There'S Quite A Bit Of Wasted Height And It Only Just Fits The Printer. Still, The Links Are Above So You Can Do This Yourself!
Statistics
Likes
16
Downloads
0